Two posts in one night - I know!  Last week when I showed you the Coffee Table I did for my client Amanda in Porters Liquid Zinc, I mentioned that I had done a couple of 'practice' pieces so I knew how the paint finish would turn out.

These were my victims:

A wine table I believe with a green leather top on it, and a pine bedside cabinet in that golden honey colour we all love (insert Tui ad here)...that means 'yeah right' for the non-Kiwis ;)

Anyway...I cleaned then primed these pieces, using Annie Sloan Chalk Paint® in Paris Grey as my primer. I could have used ordinary adhesion primer but I wanted to check the Chalk Paint® worked as a primer when you put another paint (non Chalk Paint®) over the top of it.  It does :)

Oh, I nearly forgot...the first thing I did was whack some nails in on the corners, to mimic rivets on a real metal piece.


After priming, I painted on the Liquid Zinc mixture, doing two coats (allowing drying time in between of course). Once that was dry I painted on the Ageing Solution and waited for the magic to happen.
Here's how they turned out...




I've learnt that the finish you get with this paint system is quite random and will differ for each project - where it bubbles, leaves holes, gets a brownish tinge, goes darker (almost purple) - all random.  The direction and pattern of your brush strokes in the base coat definitely has an effect - you can see them quite clearly in this photo above. Keeping the brush strokes all over the place adds to the effect I think.








These pieces are available for sale, please contact karen@restyledvintage.com for details.

Hi, today I'm showing you a coffee table makeover I've just finished.

My client, Amanda wanted an industrial style metallic look for her pine coffee table. She sent me some inspiration pictures and I did a bit of research and found Porter's Liquid Zinc, which I thought would give the look she was after.  

I directed Amanda to their website, to see what she thought, and she agreed.  

I watched this Porters video on Youtube too.

The drawers had a black stain on them - Amanda had decided to start the makeover herself before deciding to call in the professionals :)  

I got to work stripping the black stain off, along with sanding back the table.

I primed the table with two coats of Zinsser Bullseye 123, then painted on two coats of a grey that I had on hand, to help with coverage of the base coat.

I mixed up the zinc mixture (it comes in two parts - a metal powder and a white liquid) then painted it on.  The instructions on the can say one coat should be enough but I didn't find that it was, even with the grey layer over the primer. I did two coats.

Here's how it looked with the metallic coats on.

After leaving it to dry for at least 24 hours, I proceeded to the next step which was the Ageing Solution - I think it is an acid that causes a reaction with the metal in the base coat.  It's pretty cool although pretty scary at the same time...I actually did another couple of small pieces at the same time as 'practice' pieces so I could see what to expect.  Plus I didn't want to waste the leftover paint mixture- once mixed, it is only good for 6-8 hours according to the can, and you cannot put the lid on as it might explode (eek!)  After that 6-8 hours it is meant to set into a gel to allow for safe disposal.  My mixture actually took more like 2 days to set hard, so I'd say the workable time is a little more generous than what they tell you.  I'll show the other couple of pieces I did in another post.

After putting on the 'ageing' solution I left the table to sit for several days before sealing it with wax.  I used Porter's Liming Wax as I thought the whiteness of this helped add to the overall effect we were going for.  Here's how it turned out...

You can see the 'zinc' effects going on here on the table top - how each piece will turn out is random and unpredictable, ie. you can't control which bits will be darker, which bits will have a slightly yellow/brownish tinge etc. 

This gives your piece an authentic aged feel and look.

I think that the table turned out great and it's certainly an improvement on the 'before'.  

In review: What did I think of the product?

The Porter's Liquid Zinc paint finish did what it said it would, and I found it easy to use.  It's all water based which is great for clean up and ease of use. There are downsides though...firstly the cost - it was over $140 for one litre of the product (you have to buy the powder, the liquid and the ageing solution). Secondly the short workable life of the product once mixed means you really need to have a few projects prepped and lined up ready to go to make the most of it.

Just to clarify, my client paid for the Porter's Liquid Zinc and I purchased it locally at a retail paint store.  This is my own review and not done at the request of Porters, the paint shop, or anyone.  

Just me, in the thoughts that it may help someone else thinking about using it :)