Search Results for "tcp ip"

SnapModbus is an Open-Source multi-platform suite (library and tools) to manage Modbus communication in strict adherence to the modbus.org specifications, both master and slave side. It supports all the functions described in the documents: * MODBUS APPLICATION PROTOCOL SPECIFICATION V1.1b3 * MODBUS MESSAGING ON TCP/IP IMPLEMENTATION GUIDE V1.0b * MODBUS over Serial Line - Specification and Implementation Guide V1.02 through the standard transport protocols and the most widespread unofficial protocols (UDP, RTU Over TCP, RTU Over UDP) It’s released under lglp v3, so it’s free also for commercial use.

MBSE BBS is a fully FTN-capable ANSI BBS package including a mailer (ifcico clone), BinkP daemon, mail tosser, TIC processor, filefind, and other utilities allowing access via modem and the Internet using telnet, ssh, http and ftp. Support is offered through the Fidonet MBSE echo and the Micronet MIN_BBS echo.

A handy stand-alone GTK+ client for accessing your favorite DX Cluster or Reverse Beacon Net server via telnet over TCP/IP.

The FNET is a free, open source, dual TCP/IPv4 and IPv6 Stack (under Apache Version 2.0 license) for building embedded communication software on 32bit MCUs.

VTun is the easiest way to create Virtual Tunnels over TCP/IP networks with traffic shaping, compression, and encryption. It supports IP, Ethernet, PPP and other tunnel types. VTun is easily and highly configurable. VPN, Mobile IP, Shaping, etc

TurnServer is a implementation of Traversal Using Relay around NAT (TURN) protocol. This protocol allows a client to obtain IP addresses and ports from such a relay.

horch is a simple multi client TCP/IP CAN server providing access via ASCII commands to the CAN bus. No download files available yet. Checkout the code please.

This is a Client and Server TCP / IP Peer 2 Peer File Transfer Protocol System. The user request the server to store a file transfer request through a PIN. The receiver resquest the server to the sender to send his file once the PIN of the sender is the same PIN of the receiver.

A modbus IP-to-serial gateway that supports TCP and UDP from the network side, and modbus serial on the other side. Written for linux, can be compiled on FreeBSD and works with minimal changes. Entirely in C, pretty small and fast.

This is a chat system composed of a TCP/IP server daemon and its corresponding java client. You can chat with other peers in clear text or AES password-based encryption on your own computer network. The AES encryption and decryption is based on 128 bit key which is reached by padding the resulting SHA256 from your provided password. Simply put, SHA is a checksum that change when a single bit change.

Sockets++ is a C++ Socket API which makes socket programming easier and more effective by taking the hard-to-use Winsock library off your shoulders. Sockets++ is easy to use and can allow you to focus on the big things rather than the low-level plumbing

This project is used to simulate Bluetooth connections over TCP/IP. The server can run under Windows or Linux however Bluetooth devices can only be simulated on Linux for now. May be used to emulate Bluetooth connections between two virtual machines (e.g. VMware) running Linux. (The server would run on the host system in this case.)

** THIS PROJECT MOVED TO GITHUB ** libEtPan ! is a mail purpose library. It will be used for low-level mail handling : network protocols (IMAP/NNTP/POP3/SMTP over TCP/IP and SSL/TCP/IP, already implemented), local storage (mbox/MH/maildir), message /

Vortex Library an implementation of the RFC 3080 / RFC 3081, known as the BEEP Core protocol, mapped into TCP/IP layer and written in C.

OpenIDAP is an Open Source Industrial Data Acquisition Protocol.

Gcomm is a serial communications program similar to seyon, but more modern, and easier to use. Works over serial port, via TCP/IP, or a pipe through another program. Supports xmodem/ymodem/zmodem protocols. Visit the gcomm.sourceforge.net home page for

BinkleyForce is a simple ifcico like FTN mailer. It can works via TCP/IP as well as on modem links.

XSockets - open, lightweight and highly portable library of universal and eXtensible Super Sockets for point-to-point communication. A unified API for many communication methods between programs and/or devices (e.g. TCP/IP sockets,serial link,pipes,IrDA)

This library can allow you to connect to the Asterisk Manager Interface (AMI). The AMI allows a client program to connect to an Asterisk instance and issue commands or read PBX events over a TCP/IP stream.

Ponticulus (a virtual COM-port over TCP/IP redirector) allows synchronous connecting and disconnecting to a remote serial port (e.g. on an embedded device). It was initially based on com2tcp, part of the com0com project. (http://com0com.sourceforge.net/)

The open-source uIP TCP/IP stack provide TCP/IP connectivity to tiny embedded 8-bit microcontrollers, with maintained interoperability and RFC standards compliance.

The system allows running and controlling the MAC controller on the Xilinx board with Virtex. This way the project provides a set of features and functionality to easy build the application and eCos and TCP/IP FreeBSD with access to Xilinx MAC controller

The Chatting Zone (TCZ) is an advanced, user-friendly multi-user environment for social (Chat) or gaming (Adventure) purposes either privately over any network supporting TCP/IP, or publicly over the Internet. It is based on TinyMUD and UglyMUG.

Argus is an Open Source, free for non-commercial use, full-featured FTN mailer designed to work as a multi-line system using two widely used data exchange transports - Dial-up networking and TCP/IP - simultaneously

General line based buffer with backlog written in "C". It supports multiple input and a single output. I/O modules: TCP/IP, UDP/IP, Unix sockets, File/Pipe. It supports backlog writing (and resume) so a failsafe transport-buffer can be build.