Search Results for "myfp2esp32-user-guide-306_02.pdf"
Sort By:
Showing 13 open source projects for "myfp2esp32-user-guide-306_02.pdf"
View related business solutions-
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
1
Zephyr Project
Scalable, optimized, secure RTOS for multiple hardware architectures
The Zephyr Project is a new generation real-time operating system (RTOS) that supports multiple hardware architectures. It is based on a small-footprint kernel specially designed for use on resource-constrained and embedded systems. The Zephyr OS can be used for a wide range of applications: from simple embedded environmental sensors and LED wearables to sophisticated embedded controllers, smart watches, and IoT wireless applications. -
2
MultiCAN
EPICS device support for CAN Bus
MultiCAN implements a CAN Bus device support for EPICS. EPICS is a framework for control systems, the CAN Bus is a reliable real-time field bus. The ‘Multi’ und MultiCAN stands for ‘Multi Protocol support’, so it supports more than one protocol for CAN Bus communication. MultiCAN has support for the CANOpen protocol and the older CAN Application Layer (CAL). -
3
TOISWITCH
TOISWITCH is a general-Purpose smart-home server for ESP8266
TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. It supports powerful... -
4
IoT Leaf
Software resources for the ESP32 based IoT Leaf microcontroller board
The IoT Leaf is a small ESP32-based device which can be used as highly flexible power supply, as embedded controller or as a combination of both: it consists of a board which can be cut into two pieces resulting in two different devices or which can be used as one. The board can be powered via solar cell or USB and provides a battery charging function and deep-discharge protection for LiPo batteries. Beside the ESP32 the microcontroller part is prepared for a LoRaWAN and a GPS... -
Find Hidden Risks in Windows Task SchedulerWindows Task Scheduler might be hiding critical failures. Download the free JAMS diagnostic tool to uncover problems before they impact production—get a color-coded risk report with clear remediation steps in minutes.
-
5
pyrpl
PyRPL turns your Red Pitaya into a powerful analog feedback device.
...PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000). -
6
MQTT Hyperdash
A universal MQTT Dashboard for linux/Raspberry Pi.
MQTT-Hyperdash is a fast and efficient dashboard (GUI) for the MQTT framework. It uses the SDL library for graphics rendering, the paho library for communication and the gtk2 framework for user input. The dashboard runs on Linux, but a port to other operating systems is possible. Special features: * Very simple and basic set of base elements. * animated analog input elements, potentiometers. * Fast update rates of 20 Hz are possible. * Easy to use: Each panel/dashboard is configured in a single .dash file. ... -
7
C-GM Counter
Connected GM Counter device (IoT) for radioactivity measure
The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other... -
8
ESP8266_Flespi_yum
ESP8266 (ESP-01) + Serial Commands + Flespi Broker
ESP-01, the simplest USD 1.50.- ESP8266 gets a firmware that allows the user to control it by serial port. Therefore it can be used along with any terminal, computer or microcontroller, which is equipped with a serial port (or USB port) -) Connect / disconnect to WiFi and Flespi MQTT broker -) Publish messages -) Subscribe to topics / Unsubscribe from topics -) Read the messages received Furthermore a GUI is on developing process to demonstrate the use. -
9
JSTx is used for displaying overlay graphics and text on top of a Philips television, changing channels, receiving remote control keys and changing television display modes. It is a command line utility to execute jointSPACE commands on a device that supports the jointSPACE protocol for Philips televisions (see http://jointspace.sourceforge.net for details on jointSPACE, which is based on DirectFB). It is used in various home automation/internet-of-things projects. There are three...
-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
smartIDS
Lightweight intrusion detection for IoT and embedded devices.
The aim of the project is a lightweight intrusion detection library for embedded devices which supports MSP430 and ARM Cortex based devices. Features include DSP/SIMD support, IoT and embedded protocols, distributed operation, event and history management, tool supported configuration and visualization. There is a Java port that supports less features. -
11
GreenHop
Energy and environmental monitoring of the server room
The solution GreenHop aims to perform energy and environmental (temperature, humidity, dew point and atmospheric pressure) monitoring of the Data Center server room, providing energy efficiency indicators through green metrics for Data Centers. The GreenHop solution is based on open source software and hardware. The approach of using open source solutions enables its deployment easier and independently of suppliers at the same time makes the solution scalable to the needs of each... -
12
Brick Firmware
Brick Firmware
Firmware for hardware which may communicate with the "Brick Daemon" ( http://github.com/Tinkerforge/brickd ) -
13
OWLOS
Open source network operating system for managing IoT devices.
OWLOS Open source network operating system for managing IoT devices: - does't require internet access or additional servers - ready to connect sensors, actuators, LCD, DHT, Stepper and other devices - does't require programming skills - built-in user interface - use web browser to access and manage your OWLOS nodes - built-in RESTful server - built-in MQTT client - at the same time WiFi access point and station, in any combination: - can be used autonomously - can work on a local network can work via the Internet can integrate with other nodes running under OWLOS - organizing an internal network. without using a servers available in source code
- Previous
- You're on page 1
- Next
