Engineered to Last
Surface Renovation
Structural Restoration
Concrete Anchoring & Bonding Adhesives
Non-Shrink Construction GroutW. R. MEADOWS is your source for all your concrete restoration needs. Our full line of concrete patches, cementitious floor repair mortars, grouts, epoxies, and more, are suitable for every concrete restoration application.
Concrete is one of the most durable building materials that man has ever developed, but as tough as it is, concrete, at some point in its life, will need to be repaired. W. R. MEADOWS has been helping designers make concrete perform at its optimum for over 100 years.
When it comes to helping you repair and restore that concrete … no one beats our 100 years, consistency in ownership and experience. Our products will repair and rejuvenate your concrete floors and concrete slabs, and then can be applied with a concrete sealer for ideal concrete repair.
NEW FROM W. R. MEADOWS – REZI-WELD 360
REZI-WELD™ 360 is a fast-curing, self-leveling joint filler made for protecting control, contraction, and construction joints in industrial concrete floors. It’s designed to support hard-wheeled traffic and heavy loads by helping protect joint edges and improve load transfer across the joint—making it a strong fit for facilities like warehouses, data centers, retail spaces, and manufacturing environments.
This 100% solids, two-component polyurea system mixes 1:1 and cures quickly, allowing foot traffic in about 30 minutes under typical conditions. REZI-WELD 360 is also suitable for filling interior random cracks in horizontal concrete slabs. For best performance, joints must be properly prepared, dry, and clean, and the material should be installed using powered dispensing equipment or a 600 mL dual-cartridge system due to its short working time.
Featured Concrete Restoration & Repair Products:

REZI-WELD 360
REZI-WELD 360 is a fast-curing, self-leveling joint filler made for protecting control, contraction, and construction joints in industrial concrete floors.…

MEADOW-PATCH SMOOTH-GRADE
MEADOW-PATCH SMOOTH-GRADE is a single-component, polymer-modified, cement-based, sands-free material used for achieving an ultra-smooth finish on precast, cast-in-place, tilt-up, or…

CG-86
CG-86 construction-grade grout is a non-metallic, mineral aggregate based, non-shrink economical grout. The product is specifically developed as a high-strength,…

REZI-WELD GEL PASTE STATE BULK
REZI-WELD GEL PASTE STATE BULK is a high viscosity, high modulus, rapid-setting, thixotropic, structural, epoxy-based, bonding agent, chemical anchoring adhesive…

FLOOR-TOP STG
FLOOR-TOP STG is a standard traffic-grade, single-component, shrinkage-compensated, self-leveling floor topping and underlayment that may be pumped or poured. FLOOR-TOP…

FLOOR-TOP STG PRIMER
FLOOR-TOP STG PRIMER is a high solids, undiluted surface treatment primer to be used with FLOOR-TOP STG standard traffic grade,…

CEM-KOTE CW PATCH
CEM-KOTE CW PATCH is a fast-setting, one-component cementitious repair mortar enhanced with crystalline waterproofing technology to provide long-term resistance to…

FUTURA-15
FUTURA-15 is a one-component, cementitious, very rapid-hardening, structural repair mortar designed for horizontal applications. FUTURA-15 is composed of selected cements,…

HYDRASET
HYDRASET calcium chloride concrete set accelerator is a ready-to-use, liquid admixture. It accelerates initial setting time one to three times…

MEADOW-CRETE GPS
MEADOW-CRETE GPS is a one-component, trowel- or pneumatically-applied (wet process), migrating-corrosion-inhibitor enhanced, polymer-modified, shrinkage-compensated, fiber-reinforced, micro-silica enhanced, cementitious repair mortar…

FUTURA-45
FUTURA-45 is a one-component, cementitious, rapid-hardening structural repair mortar designed for horizontal applications. FUTURA-45 is composed of selected cements, graded…

800 CONSTRUCTION GROUT (Canada)
800 CONSTRUCTION GROUT is a pre-blended Portland cement grout containing non-ferrous admixtures to counteract plastic and drying shrinkage. The product…

825 PARGE-ALL (Canada)
825 PARGE-ALL is a single-component sand/cement blend designed for coating or parging vertical surfaces. 825 PARGE-ALL is a pre-mixed blend…

803 CONSTRUCTION GROUT – SR (Canada)
803 CONSTRUCTION GROUT – SR is a pre-blended Portland cement grout containing non-ferrous admixtures to counteract plastic and drying shrinkage.…

805 CONSTRUCTION GROUT – WINTER-GRADE (Canada)
805 CONSTRUCTION GROUT WINTER-GRADE is a pre-blended Portland cement grout containing non-ferrous admixtures to counteract plastic and drying shrinkage. Complying…

MEADOW-CRETE OV
MEADOW-CRETE OV is a glass fiber reinforced cementitious patching compound designed for overhead and vertical applications. The polymer-modified and silica…

FIBRE-PATCH OV
FIBRE-PATCH OV is a one-component, add water only, hydraulic cement based, polymer-modified and silica-fume enhanced, fibre-reinforced mortar. The polymer-modification allows…

FIBRE-PRIME
FIBRE-PRIME is a two-component, water-based, polymer-modified cementitious coating designed to rustproof and protect rebar and steel surfaces from corrosion. It…

Concrete Repair & Restoration
W. R. MEADOWS realized that various technologies, many of which are still used today, were not working. Expensive concrete restoration projects were being undertaken with concrete repair mortars that had a tendency to excessively shrink, resulting in cracking and loss of bond.
This cracking allowed the ingress of chlorides back into the repair zone to re-attack the embedded rebar … premature failure of the repaired area was imminent. The cost to contractors and owners for these premature failures was and continues to be significant.
Also, if not more important, the industry, through a coordinated research program, had determined that a successful structural repair required the repair mortar to behave like the host concrete. The similarities of the two materials would allow for proper load transfer and thus avoid point load transfer issues, which led to many long-term problems with past structural repairs.
W. R. MEADOWS is a proud recipient of the International Concrete Repair Institute (ICRI) Award of Merit: Industrial Category. Click here for more information.
The MEADOW-CRETE family of structural concrete repair mortars was developed to combat this industry problem. Utilizing the latest technologies, the MEADOW-CRETE line of mortars were designed to have these properties:
- Exceptionally low shrinkage, shrinkage compensated
- Increased tensile capacity through polymer modification and fiber reinforcement
- Increased “toughness” and reduced permeability through the use of micro-silica and polymer
- Polymer-modified to enhance not only flexural strength, but also bond strength
- Active protection of embedded rebar (migrating corrosion inhibitor)
- Physical properties similar to native concrete to ensure compatibility in truly structural concrete repairs
MEADOW-CRETE is available in multiple formulations to suit specific project and application requirements from low-pressure spray, hand applied to form and pour applications. Our products are backed by a technical team that can help you choose the proper product for your specific requirements.
W. R. MEADOWS’ extensive research and development department ensures that the latest proven technologies are at work for you in our structural concrete repair line.
MEADOW-PATCH SMOOTH-GRADE Concrete Repair Video
- Parking Garages
- New Construction Restoration
- Dams
- Water Retraining Structures
- Tunnels
- Buildings
- Shear Walls
- Balconies
- Concrete Pavement
- Concrete Dressing
- Bridges

Coverage Calculator
The W. R. MEADOWS Product Estimator app is a great way to learn all about our products. The app includes a coverage calculator that will spell out just how much product you will need once you input the project’s size. We feel this is a great app for all construction professionals, whether you’re an architect, contractor, engineer, or building owner.
Request More Information
To contact your local W. R. MEADOWS representative or for general correspondence, please click here. If you need immediate assistance, please call (800) 342-5976. Thank you!
Concrete Restoration & Repair Products:

SPECTRUM RE-KOTE TF
SPECTRUM RE-KOTE TF is a single-component, polymer-modified, rapid-hardening, cementitious concrete repair mortar designed for the renovation and resurfacing of deteriorated…

FUTURA-45 EXTENDED
FUTURA-45 EXTENDED is a one-component, shrinkage-compensated, proprietary blend of cements, aggregates, and performance-enhancing chemical additives. This rapid setting concrete is…

FUTURA-45
FUTURA-45 is a one-component, cementitious, rapid-hardening structural repair mortar designed for horizontal applications. FUTURA-45 is composed of selected cements, graded…

FUTURA-15
FUTURA-15 is a one-component, cementitious, very rapid-hardening, structural repair mortar designed for horizontal applications. FUTURA-15 is composed of selected cements,…

REZI-WELD 3/2
REZI-WELD 3/2 grout-patch is a moisture-insensitive, two-component epoxy kit for grouting, sealing base plates, and patching concrete. Part A, the…

REZI-WELD LV
REZI-WELD LV is a two-component, low-viscosity injection epoxy designed for sealing fine, non-moving structural cracks in concrete. Ideal for gravity…

REZI-WELD LV STATE
REZI-WELD LV STATE is an ultra-low viscosity, two-component, 100% solids, rapid setting, epoxy-based, structural injection resin. It is a solvent-free,…

REZI-WELD GEL PASTE
REZI-WELD GEL PASTE is a high viscosity, rapid setting, thixotrophic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection resin. REZI-WELD GEL…

REZI-WELD GEL PASTE STATE
REZI-WELD GEL PASTE STATE is a high viscosity, high modulus, rapid-setting, thixotrophic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection gel.…

EG-96 HP
EG-96 HP is a three component, 100% solids, VOC and BGE1 free, epoxy resin system designed specifically for pours from…

SPEED-E-ROC
SPEED-E-ROC is a pourable, rapid setting and hardening, high strength, hydraulic cement compound designed for anchoring and grouting. SPEED-E-ROC has…

MEADOW-PLUG
MEADOW-PLUG is a specially blended, extremely fast setting, hydraulic cement product designed to instantly stop running water or fluid seepage…

CG-86
CG-86 construction-grade grout is a non-metallic, mineral aggregate based, non-shrink economical grout. The product is specifically developed as a high-strength,…

CG-86 DOT
CG-86 DOT construction-grade grout is a non-gaseous, non-shrink economical grout. It was specifically developed as a high strength, cost-effective, general-purpose…

CG-86 N.E. (Northeast U.S.)
CG-86 N.E. construction-grade grout is a non-gaseous, non-shrink economical grout. It was specifically developed as a high strength, cost-effective, general-purpose…

1428 HP
1428 HP is a precision, non-shrink, mineral-based grout designed for structural and equipment base applications. It provides strong, stable support…

588-10K
588-10K is a hydraulic-cement-based, precision, non-shrink, load-bearing grout designed to transfer load effectively and safely, ensuring long service time of…

PAC-IT
PAC-IT packable grout is a non-ferrous, non-shrink grout specifically formulated for grouting applications, without the need for expensive form work.…

FLOOR-TOP STG
FLOOR-TOP STG is a standard traffic-grade, single-component, shrinkage-compensated, self-leveling floor topping and underlayment that may be pumped or poured. FLOOR-TOP…

REZI-WELD FLEX
REZI-WELD FLEX is a semi-rigid, pourable epoxy joint filler designed for interior concrete floors where joints see repeated traffic, impact,…

REZI-WELD 1000
REZI-WELD 1000 is a medium-viscosity, two-component, construction-grade structural epoxy adhesive. It is moisture-insensitive and resistant to many chemicals.

MEADOW-PATCH 5
MEADOW-PATCH 5 is a one component, cementitious, very fast setting restoration/repair mortar and water plug. This product has a light…

MEADOW-PATCH 20
MEADOW-PATCH 20 is a fast-setting, easy-to-apply repair mortar designed for concrete patching work where you need strength and quick turnaround.…

MEADOW-PATCH T1
MEADOW-PATCH T1 is a one-component, polymer-modified, cementitious repair mortar designed for horizontal, vertical, and overhead applications. This all-purpose mortar is…

MEADOW-PATCH T2
MEADOW-PATCH T2 is a two-component, polymer-modified, cementitious concrete resurfacer and repair mortar.

MEADOW-CRETE GPS
MEADOW-CRETE GPS is a one-component, trowel- or pneumatically-applied (wet process), migrating-corrosion-inhibitor enhanced, polymer-modified, shrinkage-compensated, fiber-reinforced, micro-silica enhanced, cementitious repair mortar…

CEM-KOTE BARRIER COTE 100
CEM-KOTE BARRIER COTE 100 is a tough, polymer-modified cementitious waterproofing and bonding coating designed for heavy-duty traffic, chemical exposure, and…