Open Source Robotics Software

DXF2GCODE is a tool for converting 2D (dxf, pdf, ps) drawings to CNC machine compatible GCode. Windows, Linux, and Mac support by using python scripting language.

Eng: The library of Conventional Graphic Symbols (CGS) for Kicad is based on russian international standards also known as GOSTs. Рус: Библиотека компонентов для Kicad, созданных в полном соответствии с требованиями УГО по международным нормативам ГОСТ.

MeKin2D is a collection of Free Pascal subroutines for kinematic simulation of planar linkage mechanisms using a modular approach.

CTSoft can be used for configuring the following drives: Digitax ST Base Digitax ST Indexer Digitax ST Plus Digitax ST EZMotion FXMP25 Field Controller Mentor MP Unidrive 'Classic' in open-loop, closed-loop vector and servo modes Unidrive SP open-loop, closed-loop vector servo modes and regen mode Commander SK drives Commander GP20 Drive in open-loop, closed-loop vector Unidrive ES open-loop, closed-loop vector and servo modes Unidrive PV CTSoft system requirements: Pentium IV 1000MHz or better recommended Windows 7, Windows Vista, Windows XP or Windows 2000 is required. Internet Explorer V5 or later should also be installed Absolute minimum of 800x600 screen resolution. 1024x768 is recommended as a minimum. Adobe Acrobat 5.05 or later (for parameter help) 256MB RAM Microsoft .NET Framework Version 2.0 Note that you must have administrator rights to install CTSoft If you have a previous copy of CTSoft installed you must uninstall it first.

Allows one to program fablab (factory and/or laboratory) in the same way as we program computer. Imagine commands like: "dim screw12 as new screw" or "mold(form_piston_081212, brass)" or ''gear(3)=lasercut(steel2,"biggear.gc")". This approach will let us program highly automated and self-deploying or even self-replicating factories. I am more engineer than programmer and just beginner in python. So it looks like community help will be needed :)

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

Software script assembly to be executed on cnc machines and robots to build, maintain and replicate open source fablab. Here software meets hardware.